Transom glued up!

Ok. Ive been off the radar for a few weeks for several reasons. Namely: Job related problems now solved, my marriage, my inadvertent cutting-off-the-tip-of-my-finger winterizing my garden which led to a giant bandage and stitches, and my work that takes me on the road. Im suposed to be on the road today, but Im not because I have a massive head cold and I think my eyeballs are going to pop out of my head. So no work for me.

About two weeks ago, I glued up the transom. Storer recommends not using screws in the transom, I think this is for aesthetic reasons. I did use screws as opposed to the nails I had been using for the BHs, primarily because I could get a slightly tighter fit. I did not use nails on the transom head-board because I wanted to maintain the visual integrity of that piece, and I was able to secure it in spot with clamps through the tiller-hole. Everything came together really nice and I am pleased with the result. I was careful to wipe away the excess, and I was sure I had gotten everything, but I didnt. I came back and found hardened drips that materialized sometime during the night and they dripped onto the stern-stern of the transom. Using a chisel to cut them off, I ended up mucho-biting into the top of the transom and took a chunk out of the ply. OH WELL. I saved the piece and will epoxy it back in.

Otherwise, I think the transom looks good!