Tartan 4000 Review

A progressive cruiser from a venerable builder

Tartan Yachts is a time honored marque in yachting. The Tartan 37 and 41 set high standards for sailing yachts back in the 1970s and 80s. In more recent years the company has been buffeted by the economic storms weve all had to weather lately and Im glad to see that they appear to be surviving, and perhaps even thriving under new ownership. The 4000 is their latest offering in the forty foot range. As you may know, Sailing World Magazines panel of experts named it 2012 Boat of the Year, so I think its worthwhile to take a good look at the boat.

Like all the recent Tartans, the 4000 was designed by Tim Jackett to be a wholesome and well appointed cruiser/racer, with the emphasis, in my opinion, on cruiser. Starting with the profile view of the boat I must say it is refreshing to see a new boat that hasnt been pushed to the far edges of the design envelope in pursuit of interior volume. The sheer is elegantly sprung and there is a nice aesthetic balance between the rake of the stem and the slope of the transom. Below the waterline the hull is relatively deep amidships and fairs into finer waterlines aft than we see in the newer boats from Europe. That raked stem has practical value beyond aesthetics. Cruising boats with plumb stems invariably accumulate scrapes and marks around the bow from the anchor chain or rode unless they have fairly long bow planks. Tartan refers to the keel as a beavertail. It looks like a squished bulb to me, which is fine. It gets the weight low without excessive draft and should provide good stability for this well balanced boat.

The bulb is different looking, but it does get the lead down where you want it.

The Tartan 4000 is propelled by an interesting sailplan that they call a Cruise Control Rig or CCR for short. The mast is carbon fiber as is the boom, which is V-shaped to capture the mainsail when it is doused, eliminating the need for a canvas stackpack. Thats a nice arrangement that I think will work well. The boat is rigged with double headsails on roller furlers. The forward one is a genoa and just a few inches aft of it is an inner forestay that carries a small working jib that sheets to a thwartships track just forward of the mast, making it self tacking. The idea is that in light air youll use the genoa and when the breeze is up youll switch to the working jib. For cruising, this arrangement might be okay as long as you remember that when sailing under the genoa, it has to be rolled almost all the way in whenever you tack. On the other had, when sailing under the working jib, that rolled up genoa is right in front of its leading edge, spoiling airflow and compromising its effectiveness. I think a better solution would be a single headstay with a well made foam luffed 140% genoa on a reefable furler. You would save the weight and cost of the second furler and have equal or better all around performance.

Tartan 4000 Cruise Control Rig

In the profile view of this boat its hard to fault the nice lines in of the deck. Its relatively low and well proportioned, with good clearances along the side decks. Ive given up on criticizing mid-boom sheeting since my own boat is rigged that way. Its not optimal from a sailing perspective but it makes other things work better, so I grudgingly accept it. The cockpit on the T4000 is really well done. Halyards and control lines are led to a pair of winches on the cabin top and the coamings are wide enough to sit on. Notice in the photo below that the mainsheet traveler is mounted on the cockpit sole, which is a practical thing to do. It might take a bit of getting used to, but it opens up the cockpit and offers much better sail control than the standard mid-boom unit. The boat has twin wheels mounted on nicely designed carbon pedestals. The photos also show that the hull is quite beamy aft, but there is considerable flair in the aft sections of the hull. I think this is a nice compromise that will reward this boat with good sailing manners in a breeze while still allowing for plenty of room in the cockpit.

Nice cockpit arrangement. Cruisers will miss having a swimstep built into the transom.

The accommodations in this boat are a pleasant surprise. The layout is thoroughly modern, with a queen-size berth in the forward cabin and strategically angled bulkheads in the main salon. The galley is large and offers plenty of counter space and storage. The nav station is also large and well designed, and just aft of it is a good sized quarter-cabin. All of these spaces work well and the only missing item is a good sea berth. Aboard the Finisterra Ive designed a lee-board to fit in the quarter cabin to make a snug berth for offshore passages and the same could be done with this boat. I think the designer was able to incorporate the nice open spaces into the boat because it has only one head. Personally, I think one head is enough for a cruising couple with occasional guests. Aboard the T 4000, they werent content with building a nice spacious and practical head, they incorporated a circular door for the shower. It may be cute as a bugs ear, but I prefer to eschew such gimmicky features that are likely to give trouble at some point.

Nice layout and solid wood joinery make for pleasant living aboard

I really do like the nice solid wood joinery in this boat. It is a refreshing departure from the IKEA-like styling of the new European inspired boats Ive been looking at lately. I saw one of these boats at a recent boat show and admired the quality of the furnishings. The engine is a 55shp Volvo with a saildrive located under the companionway. That many horses will push the 4000 along at hull speed in almost any conditions.  Back in my boatbuilding days we installed a good many saildrives, mostly Yanmars, and they work very well especially on racing yachts. But I personally prefer the trusty shaft and strut type for long distance cruising. Ive seen more than a few boats having saildrives replaced in inconvenient harbors.

Traditional wood joinery makes for very pleasant accommodations

The Tartan 4000 looks like a sweet ride for local cruising and club racing, and it could easily be optimized for offshore passagemaking. It has some interesting features such a cast and polished fairleads for the mooring cleats that add a touch of class . My guess is that most of the time youll bypass them, but they sure are pretty. I checked PHRF numbers for this boat and it looks like the rating is going to settle in the 72-84 range, which is quite respectable for this boat. Im sure the good looks, build quality and  BOTY award will generate lots of attention for this boat. Its definitely worth a look.

Continue

Finisterra Update

In the last couple of months weve been sailing the boat quite a bit. The stackpack system works well. Its different from typical systems in that when were sailing it can be rolled up and secured along the boom instead of staying deployed. Its a bit more work to roll it up but I much prefer the sail unfettered by the bag and lazy jacks.

Slick stackpack contains the full battened mainsail

Awhile back I mentioned that the autopilot was not working properly. After searching the Internet for ideas on how to fix it, I removed the linear drive and rebuilt it, then reinstalled it, confident that Id solved the problem. But I was wrong. So Ive ordered a new drive which should arrive next week.

The boat came with funky pleated cloth curtains on all the portlights. I suppose theyre stylish in a 1990s sort of way, but they are eight years old and at the end of their useful life. We really liked the OceanAir shades we had on the Honcho so we ordered a set from Defender and installed them last week. These shades block out 100% of the sunlight and are good looking.

One thing Ive wanted to change since we got the boat was to upgrade the ground tackle system. The original equipment included a 40 LB Bruce anchor, 40 feet of 3/8" BBB chain and 150 feet of nylon rode. The new system includes a 55 LB Rocna anchor, 200 feet of 5/16" G40 chain and 150 feet of nylon rode. This requires changing the chain gypsy on the windlass. To do that, I had to remove the windlass. This is a simple matter of four bolts. When I got it out of the boat I discovered a lot of corrosion around the base of the unit. Ive noticed that the shelf in the anchor locker where the windlass is mounted is often wet, either with seawater or fresh, so its no wonder the aluminum housing of the windlass is corroded. When I re-install the unit Ill make a mounting plate out of 1/2" StarBoard to raise it up so that it never sits in water.

My winter project is to go through the exterior canvas on the boat. Ill lower the dodger by an inch or two, make some changes to the bimini and have side curtains made for it. Ill also set it up to mount solar panels to it. 

Continue

Jeanneau Sun Odyssey 41 DS

DS 41: New Look from Jeanneau

Recently Ive been looking at the new Sun Odyssey DS line of cruising yachts and had a chance to go aboard one of these uniquely styled boats at a recent boat show. In reviewing this design Ill start with the overall proportions of the boat because we can learn a lot about a boats sailing qualities just by assessing the juxtaposition of the keel, rig and hull volumes. Boats can be beautiful or not, but I think boats that perform well are always better looking than those that dont, regardless of dimensions and coefficients. In the profile view above, notice the relationships between the hull, keel and rig. The nearly vertical leading edge of the keel is slightly forward of the mast.  On the deckplan youll see that there is a jib traveler also just forward of the mast along with a pair of jib tracks just aft of it, with the shrouds led to chainplates that are located almost at the gunwales. All of this dictates that the 41DS will carry small headsails, while the mainsail shown in the photos is a good looking fully battened and lazy-jacked unit with lots of power. This arrangement looks to me like it will generate a good deal of weather helm, so itll be interesting to take this boat out for a test sail.

Beamy and full ended, the DS 41 offers plenty of room below, but how does she sail?

In studying the shape of the hull, I see that Jeanneau has embraced the current fad of chines from about station 6 to the transom. This may add a bit of visual interest to this hull but wont appreciably affect its performance. I would call this a chubby boat in which accommodations were perhaps more important to the builder than speed. The rudder is deep and powerful and will be appreciated when the boat is on a reach.

I think the DS 41s deck is a bold, even audacious, design. The height and bulk of cabin trunk is visually mitigated by the clever use of smoked plexiglass windows and molded-in steps aft. With the jib tracks mounted on the cabin top, side decks are uncluttered, making fore and aft movement easy. The cockpit coamings are an extension of the roofline of the cabin trunk, curving downward to a point just forward of the helm station. I leave it to you to judge the aesthetics of this design, but I will say that I found the slope of these coamings to be uncomfortable for sitting. Of course there are seats aplenty in the cockpit, but I still think the coamings should be more than just styling points. While Im on the subject of the coamings Ill mention the winches. I appreciate that they are conveniently located for the helmsman, and that they are electric (at least on the boat I was aboard). But the location of them means that under sail, the helmsman is going to be very busy at times managing the sheets and other controls that are led to this pair of winches. Given their location, there is no good way to get any real leverage to pull on any of the lines that are led to them and the crew who jumps in to help will likely be a distraction for the helmsman. The mainsail is controlled by a German style sheet system without a traveler. Were seeing this arrangement on many new designs and I think it is an inexpensive alternative, but I prefer to  have a traveler.

Twin wheels are really a requirement on the 41DS because of the very wide stern of this boat. They enable the helmsman to sit well outboard so he or she can see the jib teltales, and they have the added benefit of making access to the swim step easy. I really like the swiveling instrument pod on the aft end of the cockpit table. Im not sure how far it swivels but Id like it to go far enough so that I could sit in the cockpit and see all the data. The cockpit is large and will be a fun place to congregate when the boat is on the hook.

Going below, you can see the benefits of that buxom hull. The wide open spaces, light colors and natural light from the plethora of hatches and ports make the 41DS a very inviting boat. More so when at anchor than at sea.

Condo-like accommodations

The DS designation stands for Deck Salon and, combined with the tallish cabin trunk, the cockpit sole is raised far enough to create a massive aft cabin with sitting headroom above the centerline berth. I think this arrangement is going to be a huge selling point for the DS 41 among buyers whose sailing ambitions are oriented more toward weekends at the island than passagemaking, which is the vast majority of sailors these days. The galley is reasonable for a boat of this size. The sinks are a bit smaller than I would like but still usable.  Opposite the galley is a large head with the shower integrated into it. There is lots of counter space and storage room here. The main cabin incorporates a large and deep dinette to starboard and a short settee to port.

Large chart table, plenty of light and even a wine locker...very French.

I like the large chart table. That enormous monitor can display all the ships data, including navigation, radar, wind, etc. as well as movies. I like this new technology, but whats missing is a good sea berth. Forward of the main bulkhead is a private cabin with ensuite head, plenty of room and lots of light. Once again, this will be an inviting place to hang out when the boat is at anchor.

Dining table converts to coffee table.

The Jeanneau Sun Odyssey 41DS represents a growing trend in the sailboat market. Except for racing enthusiasts, sailors want a roomy, comfortable place to spend time with their families. They want reasonably good performance but not at the cost of comfort. I think the 41DS fulfills these requirements very well. I would add that given these harsh economic times, which are even more so for sailboat builders, providing for the needs of their customers at a cost they can afford is an extremely difficult proposition. Synthetics are replacing wood, square corners and modular structures are replacing handcrafted interiors, and closed molding is the method of choice for making fiberglass parts. The result is boats that are strong, lightweight and have the aura of styling by IKEA. This can be a good thing if your yachting taste runs in that direction.

Continue