Beneteau 423 First Impressions

We took possession of our new 423 last weekend and renamed it Finisterra. Yesterday we went for our first sail and finally had an opportunity to try the boat on all points of sail under power and under working sails. Here is a brief summary of what we discovered.

We left the slip in the downtown marina and took advantage of the flat water and light air in the turning basin to see how the boat maneuvers in forward and reverse. Finisterra is equipped with a Slipstream 3 bladed folding prop. We found that it operates smoothly when going from neutral into forward or reverse and provides plenty of thrust in forward. Outside the marina we saw 7 knots with the Yanmar diesel running at 2,200 RPM. Since its a folding prop, it takes some throttle to get the boat moving when backing down, but overall performance is good. We had a three blade feathering prop on our last boat and it would occasionally snag some seaweed, so I think this prop is a good compromise for our purposes.

Sailing conditions were excellent with about 12 knots of breeze that built to about 16 in the afternoon. I unfurled the mainsail and I have to admit that its awfully easy to operate the in-mast furling system. We puttered around under the mainsail only for half an hour. Its a tiny thing with a hollow leach and no battens but it has fairly good shape and pushed the boat along at about 5 knots in 15 knots of wind on a beam reach. I was pleased to see that it is in nearly new condition. With the 140% jib set, the boat came alive and we drove upwind with the apparent wind angle at about 40 degrees and about 7.5 knots of speed. Later, as we bore off to a close reach, the speed increased to about 8. Easing sheets a bit more, we put the boat on a beam reach and saw 8.5 on the knotmeter. Bearing off further brought the wind on the port quarter and our speed dropped as we expected. At all times the helm was light and well balanced, and perfectly responsive. Sailing back toward the marina the wind fell to about 5 knots as we approached the marina entrance and the boat ghosted along very nicely. I rolled up the jib and fired up the engine, then furled the mainsail just before entering the marina. All almost too easy. Our berth is near the head of the gangway and the fairway is narrow so its a tight turn into our downwind slip but the boat maneuvered easily and we made our first landfall perfectly.

Having designed, built and sailed a number of racing yachts, I expect my boats to perform well. There is no need for a cruising boat to be a slug in terms of performance or handling and the B423 meets my expectations. I struggle with the idea of in-mast furling. I prefer the strength and simplicity of a full battened main and slab reefing and will likely convert this rig. Other than that, were very pleased with the boat.

Continue

Morris 45RS Review

M45RS with non-overlapping jib and in-boom furling main. 

Weve been having a grand time tinkering with the Finisterra but the previous owner was so meticulous in his care of the boat that there is little for me to repair or rebuild. So while were waiting for the new mast, I thought it would be fun to take a look at the M45RS, the latest offshore racer/cruiser from Morris Yachts. Morris has been around since the 1970s and has had a longstanding relationship with Chuck Paine, who designed this boat as well as the pretty double-enders that Morris was originally known for.

A modern and powerful rig on the M-45RS. Notice the spreaders and non-overlapping headsail.  This is a racing rig on a sleek hull with a deceptively cruisey deck.

Morris describes this new boat as a "Fast yet extremely durable IMS and PHRF racing yacht, [yet] she is also highly qualified for long distance adventures." Im not too sure about optimizing for PHRF, but the M45 is clearly a faster ride than we ordinarily expect from Morris. The rig certainly would not look out of place on a pure racing machine. Its tall, with non overlapping headsails and a carbon fiber three-spreader mast. The sail area/displacement ratio is a healthy 19.30 and the displacement/length ratio is 149. These ratios indicate a fairly powerful rig on a medium displacement hull. The ballast/displacement ratio of .42 is somewhat indicative of a stiff boat that should go upwind quite well, but the drawback in these impressive performance numbers is the draft, which is only 5.83. That will compromise the upwind performance of the M45. Of course there are many parts of the world where more draft would limit the places you can go in this boat, so the choice is to put a deeper keel on the boat and go get some trophies, or settle for fewer trophies and more cruising destinations. Since I live in California where the water is plenty deep, Id go with a deep keel if theyd offer one.

Notice the mid-cockpit main traveler and exposed windlass.

The deck layout of the M45 is an interesting compromise for racing and cruising and it exposes the difficulty of trying to be both a racer and a cruiser. Starting at the bow, notice the traditional pulpit. It works fairly well for a cruiser, but makes handling the asymmetrical spinnaker, which is set on an extendable pole, tricky. The foredeck, which is quite small is further cluttered by the windlass, making scrambling around up there a bit more challenging for the bowman. Moving aft, there is a pair of dorade vents just forward of the mast which will be much appreciated when its hot and sultry in the galley, but add more clutter to the foredeck. I was surprised to see the drawings showing the mainsheet led forward along the boom, admirals cup style, then aft along the deck to a pair of winches adjacent to the traveler. Im certain that arrangement was quickly changed to a cabintop traveler and conventional mainsheet system. The cockpit is too small for that sort of arrangement and few cruising families would tolerate the traveler bisecting the cockpit. Aside from those small items, dont you think the proportions of the sheer and cabin trunk are simply elegant? I also like the slim lines of this boat. It is a bit narrower and finer in the stern than youll find on similar sized production cruisers. This gives up some space below but will result in an easy motion and good all around performance.

Morris offers the boat in two basic versions, galley up and galley down.  In the galley up version, the main salon is forward and a step down from the raised portion of the cabin trunk. Just forward of that is the forward cabin, which includes a queen size berth, plenty of seating and storage and lots of varnished wood.

Sweet lines are evident in the hull shape. Is this a practical layout?

In the raised part of the cabin youll find a large galley to port, offering the cook lots of light and splendid views through the large windows. The nav station, to starboard is equally inviting, with lots of finely crafted wood and all the instrumentation you need to circle the globe. Adjacent to the companionway is the boats only head. Its spacious and incorporates a shower stall. Opposite the head is a quarter cabin to port, with a double berth and what appears to be plenty of storage.

Galley down arrangement. I like the shape of the underbody, but not so thrilled with the saildrive.

In the galley down arrangement, the main salon is in the raised part of the cabin, along with the head and nav station while the sleeping cabins are the same as in the other arrangement. In this version, with the galley forward where the motion of the boat is greater, cooking will be a bit more challenging. I like this arrangement almost as much as the other, but neither seems quite right to me. I think its better to have the dinette as well as the galley in the raised part of the cabin, and the head forward, next to the forward cabin. I keep trying to imagine us living aboard this boat and I have a feeling Id want to change things around before long. Imagine yourself living on this boat. What do you think?

One thing we can be certain of is the quality Morris puts into the boats they build. There are photos of the M 45RS on the Morris web site (www.morrisyachts.com) which is where I got the drawings and photos for this review. I encourage you to visit the site and enjoy not only the photos of this boat, but the earlier boats that Morris built. You cant help but admire them.

Continue